As a new method of heating the home independent heating system can not only achieve the room temperature control and hot water needs, to achieve comfortable and energy-saving effect, but also meet the aesthetic requirements of interior decoration, is a lot of independent heating users prefer heating methods. Family, then, independent heating system, how to use can be the most energy efficient? Comfortable 100 network experts depending on the heating terminal equipment, specifying the family independent heating system, energy-efficient manner.
Family independent heating system, energy-saving mode: the boiler should maintain long-term power. Many users in the case of long-term without heating cut off power to the boiler, that the safety and energy saving, in fact, this approach is worth the candle. The vast majority of the heating boiler to prevent the pump locking and auto antifreeze function, usually every 24 hours will automatically start running about 1 minute, minimal power consumption.
Can not be closed when the room temperature below 0 ° C, heating boilers, power and gas valve, otherwise automatic antifreeze function of the boiler will be lost in severe cases may lead to a radiator or pipe rupture. If it is winter for long periods of time, the boiler is set in the the antifreeze state can; In addition, if the power failure time is longer, boiler pump locking, only to professionals to fix, so do not self-operating.
Third, before the use of inspection for leaks, leaking, ensure that there is no problem to re-use. Leak check can not use open flame can be used lather check. When the system needs to overtime pay, overtime pay can not be too much, or prone to water leakage.
Family independent boiler heating system, energy-saving ways: using the floor heating as the heating of the user of the terminal, rapid heating, cooling. Before the opening of each heating period, open the filter on the water trap water supply pipes to clear the debris. Warming 1 ° C per hour gradually warming up, not to one-off to the highest temperature, or likely to cause damage to the pipes and the floor. The family floor heating, appropriate floor surface temperature around 28 ℃. Floor heating system is turned off, pay attention to cooling can not be plunged, if the cooling too fast which will affect the service life of pipes and floor. Temperature below 0 ℃, uninhabited when ground heating is set to run at low temperatures, to prevent the pipe frost crack.
Placed in the floor heating indoor furniture, place objects, it is best to keep the space of more than 5cm from the ground, in order to heat up distributing.
Once again, to a reasonable use of the thermostat. Many thermostats can achieve daily sessions, the function of the sub-room control room temperature. Bedroom habits in the room no one time period is set to low temperature, while the user stay period is set to a comfortable temperature. In this way, both to ensure the energy efficiency of the system, but also ensure that the indoor warmth.
Family independent heating system, energy-saving mode: If you are using the radiator as heating terminal, then best not to place objects within the front of the radiator a Minei Fan. Encounter rainy weather, many users like drying clothes on a radiator, or used long curtains to cover the radiator, and some still Heating of furniture, so that will affect the cooling effect of the radiator. Therefore, in order not to affect the radiator uniform release of heat, the front of the radiator within one meter is best not to place objects.
When the room temperature below 0 ° C, for long periods of heating the room radiator can not completely close all valves, radiator or pipe internal water by heating stove internal expansion tank, the expansion of the outside influence can not play a role to ease the pressure, serious will lead to a radiator or pipe rupture.
In addition, the indoor temperature is best not to outdoor temperature difference is too large, the room temperature remains around 18 ℃ can. Because the room temperature is increased by 1 ° C, the system\\ s energy consumption will increase about 10%. And the temperature difference is too large, people tend to cold, is also detrimental to the health.
Family independent heating system imported from Europe and the United States and other developed countries the heating mode, it is quite common in Europe and North America, China also began to occupy the mainstream market. If the user is able to grasp more family independent heating system, energy-efficient manner, and the practical application of the domestic heating boiler equipment, heating costs will be greatly decreased, while fully guarantee the system operation, comfort, energy efficiency, stability.